No abstract uploaded!

Forest above-ground biomass (AGB) can be estimated based on light detection and ranging (LiDAR) point clouds. This paper introduces an accurate and detailed quantitative structure model (AdQSM), which can estimate the AGB of large tropical trees. AdQSM is based on the reconstruction of 3D tree models from terrestrial laser scanning (TLS) point clouds. It represents a tree as a set of closed and complete convex polyhedra. We use AdQSM to model 29 trees of various species (total 18 species) scanned by TLS from three study sites (the dense tropical forests of Peru, Indonesia, and Guyana). The destructively sampled tree geometry measurement data is used as reference values to evaluate the accuracy of diameter at breast height (DBH), tree height, tree volume, branch volume, and AGB estimated from AdQSM. After AdQSM reconstructs the structure and volume of each tree, AGB is derived by combining the wood density of the specific tree species from destructive sampling. The AGB estimation from AdQSM and the post-harvest reference measurement data show a satisfying agreement. The coefficient of variation of root mean square error (CV-RMSE) and the concordance correlation coefficient (CCC) are 20.37% and 0.97, respectively. AdQSM provides accurate tree volume estimation, regardless of the characteristics of the tree structure, without major systematic deviations. We compared the accuracy of AdQSM and TreeQSM in modeling the volume of 29 trees. The tree volume from AdQSM is compared with the reference value, and the determination coefficient (R2), relative bias (rBias), and CV-RMSE of tree volume are 0.96, 6.98%, and 22.62%, respectively. The tree volume from TreeQSM is compared with the reference value, and the R2, relative Bias (rBias), and CV-RMSE of tree volume are 0.94, −9.69%, and 23.20%, respectively. The CCCs between the volume estimates based on AdQSM, TreeQSM, and the reference values are 0.97 and 0.96. AdQSM also models the branches in detail. The volume of branches from AdQSM is compared with the destructive measurement reference data. The R2, rBias, and CV-RMSE of the branches volume are 0.97, 12.38%, and 36.86%, respectively. The DBH and height of the harvested trees were used as reference values to test the accuracy of AdQSM’s estimation of DBH and tree height. The R2, rBias, and CV-RMSE of DBH are 0.94, −5.01%, and 9.06%, respectively. The R2, rBias, and CV-RMSE of the tree height were 0.95, 1.88%, and 5.79%, respectively. This paper provides not only a new QSM method for estimating AGB based on TLS point clouds but also the potential for further development and testing of allometric equations.

The goal of urban building mesh simplification is to generate a compact representation of a building from a given mesh. Local smoothness and sharp contours of urban buildings are important features for converting unstructured data into solid models, which should be preserved during the simplification. In this paper, we present a general method to filter and simplify 3D building mesh models, capable of preserving piecewise planar structures and sharp features. Given a building mesh model, a mesh filtering technique is firstly designed to yield piecewise planar regions and extract crease contours. The planar regions are used to constrain the simplification of the mesh. Mesh decimation is achieved through a series of edge collapse operations, which uses regional structural constraints and local geometric error metrics to handle planar and non-planar areas respectively. The proposed method preserves the mesh structure with meaningful levels of detail while reducing the number of faces. The effectiveness of this method is evaluated on various building models generated from different observation scales, and the performance is validated by extensive comparisons to state-of-the-art techniques.

We establish a parametric extension$h$-principle for overtwisted contact structures on manifolds of all dimensions, which is the direct generalization of the 3-dimensional result from [12]. It implies, in particular, that any closed manifold admits a contact structure in any given homotopy class of almost contact structures.

No abstract uploaded!