In this numerical study on Rayleigh-Benard convection, we seek to improve the heat transfer by passive means. To this end we introduce a single tilted conductive barrier centered in an aspect ratio one cell, breaking the symmetry of the geometry and to channel the ascending hot and descending cold plumes. We study the global and local heat transfer and the flow organization for Rayleigh numbers 10(5) <= Ra <= 10(9) for a fixed Prandtl number of Pr = 4.3. We find that the global heat transfer can be enhanced up to 18%, and locally around 800%. The averaged Reynolds number is always decreased when a barrier is introduced, even for those cases where the global heat transfer is increased. We map the entire parameter space spanned by the orientation and the size of a single barrier for Ra = 10(8).

This paper presents a numerical study of the Rayleigh-Benard convection (RBC) in two-dimensional cells with asymmetric (ratchet) roughness distributed on the top and bottom surfaces. We consider two aspect ratios of roughness gamma = 1, 2 and the range of the Rayleigh number 1.0 x 10(6) <= Ra <= 2.0 x 10(10) with the Prandtl number Pr = 4. The influences of the roughness on the heat transfer and the flow structure are found to be strongly dependent on both Ra and the roughness geometry. We find that the roughness can have a significant influence on the organization of the secondary corner rolls, and the corner rolls are evidently suppressed by the roughness for intermediate values of Ra. In the presence of the roughness, a sharp jump of the Nu values is identified as the Ra value is slightly increased, accompanied with the dramatic changes of the large-scale flow structure and the plume dynamics. The influences of the ratchet orientation on the heat transfer and the flow structure are discussed and analyzed.

We study the translational and rotational dynamics of neutrally buoyant finite-size spheroids in hydrodynamic turbulence by means of fully resolved numerical simulations. We examine axisymmetric shapes, from oblate to prolate, and the particle volume dependences. We show that the accelerations and rotations experienced by non-spherical inertial-scale particles result from volume filtered fluid forces and torques, similar to spherical particles. However, the particle orientations carry signatures of preferential alignments with the surrounding flow structures, which are reflected in distinct axial and lateral fluctuations for accelerations and rotation rates. The randomization of orientations does not occur even for particles with volume-equivalent diameter size in the inertial range, here up to 60 dissipative units (eta) at Taylor-scale Reynolds number Re-lambda = 120. Additionally, we demonstrate that the role of fluid boundary layers around the particles cannot be neglected in reaching a quantitative understanding of particle statistical dynamics, as they affect the intensities of the angular velocities and the relative importance of tumbling with respect to spinning rotations. This study brings to the fore the importance of inertial-scale flow structures in homogeneous and isotropic turbulence and their impacts on the transport of neutrally buoyant bodies with sizes in the inertial range.

We perform a numerical study of the heat transfer and flow structure of Rayleigh-Benard (RB) convection in (in most cases regular) porous media, which are comprised of circular, solid obstacles located on a square lattice. This study is focused on the role of porosity in the flow properties during the transition process from the traditional RB convection with (so no obstacles included) to Darcy-type porous-media convection with approaching 0. Simulations are carried out in a cell with unity aspect ratio, for Rayleigh number from to and varying porosities , at a fixed Prandtl number , and we restrict ourselves to the two-dimensional case. For fixed , the Nusselt number is found to vary non-monotonically as a function of ; namely, with decreasing , it first increases, before it decreases for approaching 0. The non-monotonic behaviour of originates from two competing effects of the porous structure on the heat transfer. On the one hand, the flow coherence is enhanced in the porous media, which is beneficial for the heat transfer. On the other hand, the convection is slowed down by the enhanced resistance due to the porous structure, leading to heat transfer reduction. For fixed , depending on , two different heat transfer regimes are identified, with different effective power-law behaviours of versus , namely a steep one for low when viscosity dominates, and the standard classical one for large . The scaling crossover occurs when the thermal boundary layer thickness and the pore scale are comparable. The influences of the porous structure on the temperature and velocity fluctuations, convective heat flux and energy dissipation rates are analysed, further demonstrating the competing effects of the porous structure to enhance or reduce the heat transfer.

No abstract uploaded!