In this paper we propose a finite element time-domain method for modeling the optical black holes (OBHs) coupled with the perfectly matched layer (PML) technique. Stability analysis is carried out for the proposed scheme. Simulations of cylindrical, elliptical and square black holes demonstrate that our method is quite effective in modeling OBHs in time domain. To our best knowledge, this is the first OBHs simulation realized by the finite element time-domain method.

In this paper, we analyze the minimization of seminorms ∥L · ∥ on R^n under the constraint of a bounded I-divergence D(b,H·) for rather general linear operators H and L. The I-divergence is also known as Kullback–Leibler divergence and appears in many models in imaging science, in particular when dealing with Poisson data but also in the case of multiplicative Gamma noise. Often H represents, e.g., a linear blur operator and L is some discrete derivative or frame analysis operator. A central part of this paper consists in proving relations between the parameters of I-divergence constrained and penalized problems. To solve the I-divergence constrained problem, we consider various first-order primal–dual algorithms which reduce the problem to the solution of certain proximal minimization problems in each iteration step. One of these proximation problems is an I-divergence constrained least-squares problem which can be solved based on Morozov’s discrepancy principle by a Newton method. We prove that these algorithms produce not only a sequence of vectors which converges to a minimizer of the constrained problem but also a sequence of parameters which converges to a regularization parameter so that the corresponding penalized problem has the same solution. Furthermore, we derive a rule for automatically setting the constraint parameter for data corrupted by multiplicative Gamma noise. The performance of the various algorithms is finally demonstrated for different image restoration tasks both for images corrupted by Poisson noise and multiplicative Gamma noise.

Two noted drawbacks can be found in nowadays’ power adapting technological scheme: the first is found in both of AC & DC adapters which is that the connection between power supply and appliance is only electrical connection. Such a connection can almost do nothing against such accidents as electric shock, illegal electricity-using, and accidents resulted from overcurrent, overvoltage, overheat and/or the like; the second is mainly found in DC power adapters, which is that one power adapter can only supply power with specified electrical parameters. It means that one adapter can only power its designated electrical appliance, which will inevitably lures two issues: one is that once the electrical appliance become out of work, its power adapter would also have to be abandoned, even if it is still in good conditions, such an outcome will result in waste of resources and environmental pollution, in addition to inconvenience for users who would have to take various kinds of adapters with them during their work and life. To solve the drawbacks above, here puts forward an adapting scheme in which electricity adapters and appliances will first conduct “communication and negotiation” prior to power delivery. The noted features of this scheme are as followings: the first, it is the first set of protocols designed for power adaptation by which all power delivery will not be conducted only with a simple electrical connection marked as “Contact and Power”, but one marked as “Agree and Power” in which power delivery will not happen unless an “agreement” by and between the power supply and the appliance has been concluded in advance. Such an electrical adapting scheme will certainly ensure that all electrical parameters may stay within the coverage specified in the course of electrical adaptation and this would thus avoid almost all safety issues resulted from electric shock, illegal electricity-using, overcurrent, overvoltage, overheat and so on; and the second, it is first time achieving the goal of which one adapter is able to provide electricity for various kinds of appliances within the designated range automatically , i.e. the power supply will be able to provide electricity with right parameters for appliances according to their requests. Such two features above will make a way for solving issues of waste of resources, environmental pollution and inconvenience of carrying different kinds of adapters. This scheme thus designed a protocol which has taken much effort to develop Topology, Connection Methods, Data Structures and the like and thus built up a set of standards related to communications necessarily by and between power adapter and appliance. Further, here also developed a physical device which implemented UPP, the “UPP Power Adapter”. According to the experiments and tests, the device reached all engineering goals designed: it can supply correct electricity and provide parameter-specified safety protection according to the requests of appliances automatically within its specified range It can be seen that UPP will soon head adapters marked as great variety and low-compatibility nowadays to unity following with more and more application of UPP in adapters just as USB had ever done on uniting computer peripherals. It will undoubtedly not only make peoples’ work and life more convenient and comfortable, but also positively contribute much to reducing pollution, protecting environment and saving resources.

No abstract uploaded!

With rheology applications in mind, we present a fast solver for the time-dependent effective viscosity of an infinite lattice containing one or more neutrally buoyant smooth rigid particles per unit cell, in a two-dimensional Stokes fluid with given shear rate. At each time, the mobility problem is reformulated as a 2nd-kind boundary integral equation, then discretized to spectral accuracy by the Nyström method and solved iteratively, giving typically 10 digits of accuracy. Its solution controls the evolution of particle locations and angles in a first-order system of ordinary differential equations. The formulation is placed on a rigorous footing by defining a generalized periodic Green’s function for the skew lattice. Numerically, the periodized integral operator is split into a near image sum— applied in linear time via the fast multipole method—plus a correction field solved cheaply via proxy Stokeslets. We use barycentric quadratures to evaluate particle interactions and velocity fields accurately, even at distances much closer than the node spacing. Using first- order time-stepping we simulate, for example, 25 ellipses per unit cell to 3-digit accuracy on a desktop in 1 hour per shear time. Our examples show equilibration at long times, force chains, and two types of blow-ups (jamming) whose power laws match lubrication theory asymptotics.